Usually between 32:1 and 50:1 are most common. The mix ratio will depend on jetting, engine configuration, ridding style and premix oil used.
I run 40:1 in all of my 2 strokes mixed with Dumonde Tech DTP. Dumonde did just come out with a new oil, I have yet to try it. Maxima Super M is also a good oil (if you are on a budget)
I would recommend running 40:1, If excess oil is dripping out of the exhaust try 50:1. on the other hand, if the exhaust is completely dry try 32:1. Most likely 40:1 will be sufficient. 16 oz of oil mixed with 5 Gallons of fuel will achieve a 40:1 mixture.
www.stexmotorsports.com
32:1 gas to oil mixture
30 liters of gas to 1 liter of oil
It would be wise to.At 32:1 ratio
Yamaha Blasters take unleaded gas only.
The blaster 200 is a 2-stroke, therefore you need to mix the gas and oil, trying running a 50:1 ratio, 50 parts of gas to one part of oil.
The oil to gas ratio will be 25:1, but if i remember correctly they are fitted with a autolube pump, unless its been disconected. Remember: 25 parts gas to 1 part oil.
for every 9.2 litters of gas add 16 ml of 2 stroke premix oil wich is 32-1
on the gas line between the gas tank and carb but it might not have one
Yamaha's Yamalube, 2 stroke oil is a good choice.
you can use pretty much any unleaded gas but it runs a little better on 89 octane , or higher but if you have a stock blaster you can run 87 octane
It is best to just do it your self trust me,but 32.1
You don't. You can remove pump and pre-mix the gas.