Want this question answered?
The coolant bleeder valve should be on the front passenger side of the engine. It will be on one of the metal hoses. The bleeder valve on the 3400 V6 engine is located on a black stem where the water pump connects to the engine block.
a "t" in the hoses at the rear, top of the engine has a restrictor built into it no "valve" and no bleeder on this car.
The coolant bleeder on the 3.5L is on the thermostat housing on top of the engine.
Not sure but, if it does have a bleeder it would be located at the highest point where the coolant flows in the engine.
it is on top front of engine on left side,belt side. above water pump on engine. there is a bleeder cap on it. the back side bleeder is to relieve fuel pressure.
Replace the bleeder valve. On vehicles equipped with a bleeder valve it is imperative you use the bleeder to remove trapped air. No other procedure will remove all the trapped air. On cars without a bleeder, you simply remove the radiator cap and start the engine. Watch until all air bubbles have escaped. This will not be sufficient on your car. Failure to remove all trapped air, will lead to a hot spot and possible engine damage.
Brake bleeder? Clutch bleeder? Coolant bleeder?
where do you find the bleeder valve on a Ford Diesel F-250 6.0
where is the bleeder valve for 2003 Saturn ion clutch
i have done this many times and the air bleeder valve is right next to where the cap for the radiator is. Which I'm sure you already know is next to the engine not the radiator. Hope this helps
Look at the back of the engine where the slave is for the clutch. The bleeder is right there. Just follow the hyd. line on the right side.
Doesn't have a cooling system bleeder valve.