I recomend buying a bottle of right stuff permatex gasket maker. I ran into problems with all other gasket potions (not to mention a broken bolt) and i used this as a last resort and it has been leak free for over a year. just make sure you put a luiberal amount on the valve cover and use the silicone bushings on the bolts. works like magic and prevents underhood fires. like i said i even busted one of them bolts and when i used that STUFF it was miraculous for a result. one more thing be sure to leave the car parked for about 24 hours before driving it after using the stuff.
Torque for valve cover bolts is 7 to 10 ft. Lbs . Tighten the bolts in a criss-cross pattern .
The correct torque spec is 85 INCH lbs.
What are the torque specifications and the tightening sequence of the cylinder head bolts on a 1996 Saturn SL1?
What is the torque specs on a 585 case ln tractor head gasket
80 nm
hondahookup.com has manuals
45,65,65 ft lbs then 90 degrees.
http://wiki.answers.com/Q/What_are_the_torque_settingsand_tightening_sequence_for_the_cylinder_head_bolts_on_a_kia_sedona_2.9 the cylinder head bolts on a kia sedona 2.9?"
hondahookup.com has manuals u can download with the info u need
What is the Cylinder Torque sequence 2000 Pontiac Montana 3.4V6
Check www.60degreev6.com -Kyle slipdunk2@hotmail.com
what is the head torque sequence for a 1991 pathfinder