This applies to all 1993 to 2002 Mazda 626's:
FS & FS-DE ENGINE
2.0L ATX Drive Plate = 71-75 ft-lbf
2.0L MTX Flywheel = 71-75 ft-lbf
2.0L MTX Clutch Cover = 14-19 ft-lbf
KL-DE & KL-G4 ENGINE
2.5L ATX Drive Plate = 45-49 ft-lbf
2.5L MTX Flywheel = 45-49 ft-lbf
2.5L MTX Clutch Cover = 14-19 ft-lbf
:)
about 2302 ft/lbs
105 ft
61 - 69 ft-lb
torque spec for automatic transmission pan bolts = 96 to 120 in-lbs. - Haynes Repair Manual #36071, 1993-2005 Ford Ranger and 1994-2005 Mazda B-Series Pick-ups
Remove the starter and inspect the ring gear on the flywheel.
It is easier to do if you install the torque convertor to the transmission and then attempt to bolt it to the flywheel. You will have to turn the convertor or flywheel to line up the bolt holes.
The torque on my 1993 is 46 ft lbs.
stock horsepower and torque was 85 HP and 115 LBS of torque
114 ft lbs of torque. 125HP... edmuds.com is a good place for info like this!
Automatic transmission pan bolts torque specifications: 96 to 120 in-lbs. Haynes Repair Manual #36071, 1993-2005 Ford Ranger Pick-ups & 1994-2005 Mazda Pick-ups, B=-s Series
164hp 164 torque, for the DE
If you care about torque specs, go to your nearest Auto-Zone and spend $20 on Haynes manual #36071. It covers 1993 to 2008 Rangers and Mazda B-series trucks. Each chapter has torque specs for all bolts in that chapters topics.