The oxygen sensor on a b2500 Mazda is located in the exhaust. It is under the truck about even with the transmission.
how do replace the thermostat on a 1999 mazda b2500 truck?
what is the transmission oil capacity for 1998 mazda 2500 pickup truck
you dont. They are not replaceable. Sell the truck
int wiring diagram
you don't. they are not replaceable. sell the truck
the thermostat in a lil bit to the left of the power steering pump
left frame rail between tank and engine
Bring to a shop that has and ABS scanner to note problem or clear codes
no where eBay is best bet only about £3 UK
To find this diagram, you can look through the users manual. If it is not there, then do a quick image search.
Depends on the make and model of the truck.
Mazda made a b2200 and b2600 truck in 1989.As for performance the engine is rated at 85hp or so and really just a mpg truck not a power house for dragging trailers or too much weight.The truck is great for general use,and driving and hauling resonable things in the bed with ease over all.
should but check with junk yard they have the book
The fuel pump is in the fuel tank and the fuel tank will have to be removed to access it. If you do not have the skill or equipment to do this properly, I suggest taking it to a shop.
Need to know if it is a truck or car and if it is a standard or automatic transmission.
probably a bad heater control valve if so easy fix
it goes in the dip stick tube.
it was standard but you could order it with an automatic from the factory
Standard or automatic transmission, they both are mounted to the transmission.
You don't use clutch fluid for a manual transmission vehicle.
the starter is going to be under the truck on the driver side, in between the motor and transmission,
If equipped with standard transmission, it will be on the clutch pedal. If an automatic it will be incorporated into the transmission switch on the transmission.