To remove the steering wheel on a 1984 Mercedes 300 you first need to remove the Mercedes logo in the center of the wheel to access the bolt holding the wheel in place. A 10mm allen socket with a 6-inch extension is needed to remove the bolt.
What size Allen socket is needed to remove bolt from caliper on 2004 ford escape
All you need is a 10mm allen socket with a 6" extension. remove that bolt and the steering wheel pops off. Yo uonly needed to remove the Mercedes logo in center of horn to access that bolt.
You will need a 5/8 socket.
You will need a 35 mm socket.
A 11/16 socket is needed to remove the 1984 Chevrolet pickup front axle hub assembly. The socket should be a five-point socket.
You'll need a 5/8" socket.
I have a 2003 Escape and it took a 7 mm socket.
The Cigarette lighter socket needs replaced. Is this an easy task? Also , can the new socket be just a standard or special socket for the Mercedes? Thanks. Ed
21mm socket and breaker bar to remove lug nuts, and a 17mm socket to remove the two caliper bracket bolts, and a 14mm socket or wrench to remove caliper from bracket. you will also need a c-clamp to shove caliper back.
Any type of socket can be used to remove a 91' Cavalier wheel cylinder bolt that looks like a reversed torx. However, make sure the socket is a bolt head socket.
A 3/8" Allen socket or wrench will work.
1 5/16 in
8mm square socket
7mm hex socket
5/8 plug socket
1. Unplug from voltage. 2. Remove lamp. 3 Remove socket from stand. 4. Replace old socket with new socket.
your going to need a t-40 torx socket.
You will need a one inch socket and ratchet. You also might need a mallet. The socket and ratchet will be needed to remove the lower control arm nuts. The mallet might be needed to loosen the control arm.
Nut you see after you remove the dust cover, in the middle of the drum, 30mm socket needed to remove