1. Jack up the car.
2. Find the oil pan. NOT the transmission pan.
3. Drain the oil.
4. Find the appropriate size socket w/ ratchet.
5. unbolt the oil pan.
6. use a razor blade and CAREFULLY scrape old gasket material off. Remember to get where the pan bolts to the bottom of the engine.
7. apply gasket to the pan. I'm not sure if you are supposed to use sealant or not. Ask a mechanic.
8.bolt it back in place.
9. If you have a bolt on the oil pan, make sure it's back in place. Also make sure everything seats properly.
10. You may as well go ahead and change the oil filter while you're doing this.
11. Add however much oil is required for your 3.8. I think you can find it on the stickers right about the radiator. Either way get it within operating range.
take off the head, replace gasket. reinstall head
I just had to replace the one in my car. If you can work on cars it is fairly easy to do. the hardest part is getting the motor out because of the mounts. but once you get it out it is super easy. The average cost for a head gasket is about 100 dollars. If you take it to someone to get it fixed they will charge you around 600, depending on where you take it.
$700 - $1200
its hard you have to take the whole dash out to reach it i had a camaro and it was b****
simply remove the valve cover gasket,take the old one off,clean the area well, and replace the gasket,tighten the cover evenly.(if ur gasket is made of corque take care not to break the gasket
Take it off, replace the gasket
Take it to a mechanic.
take off wheels
you should only change the gasket if you have to take the valve cover off....... you should only change the gasket if you have to take the valve cover off.......
The video available on youtube can help you replace fog lights in a 2012 camaro, however, you can also take your car to the workshop for your convenience.
It would be wise to replace the intake gasket with a new one than to try to fix the old one. How long it would take to replace the gasket would depend on the model, year and engine type you have.
yes you can replace the head gasket. you can on all engines. you just gotta take the head off