A set of Metric wrenches/metric sockets a jack and that's about it once you separate the tranny it slides right off. Remember to pick up a big 32mm socket for the drive axles toughest to break loose.
....Suree. More information is needed
socket rench and a c-clamp
The year, make, model and engine info needed.
According to most owners manuals, every 2 years or as needed.
yes but a very special tool is needed
flywheel ,clutch plate, pressure plate,release bearing,gear box,lever,mounting,clutch pedal.clutch pump 2,....good mechanic
When you don't have the needed remover tool, it's a mechanic's job; it's inexpensive because only the assy belt has to be removed, the clutch pulled and then reasambled with a new part.
I used a 12 inch crescent wrench and a 13mm wrench on the water pump pulley bolts. if it wont budge, tap the fan clutch nut with a hammer, sometimes they are hard to get off
Engags and disengages the engine fan as needed.
Changing a VW Polo clutch cable requires exposing both ends of the cable. An open ended wrench will be needed to loosed the existing cable. After replacing the cable, be sure to bleed the line to prevent failure.
Engages and disengages the compressor clutch as needed.
The clutch reservoir on a 1996 Geo Tracker is located in the engine compartment, near the firewall. It stores clutch fluid which is pulled into the system as needed.