0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Can you use a torque wrench in both directions?
Yes, you can use a torque wrench in both directions.
How do you use a torque wrench when the manual says to use a foot pound torque?
Use a torque wrench that is graduated in ft. lbs or do the math.
What does a mechanic use to tighten a car wheel?
A torque wrench, usually a power torque wrench
How do you change wheel lugs?
Use the wheel wrench that came with the car, r&r them one at a time, torque to spec-about 80# for most. Use a torques wrench with the right size socket-don't guess at final torque.
If you add an exton to your torque wrench does it change the torque?
as long as your extension is 90 degrees from the handle it will not affect your torque wrench. if you use a super long torque wrench you may lose a little torque in the extension it self but should not affect torque. an extension affecting the wrench in lenght like a crows foot will affect torque as long as your extension is 90 degrees from the handle it will not affect your torque wrench. if you use a super long torque wrench you may lose a little torque in the extension it self but should not affect torque. an extension affecting the wrench in lenght like a crows foot will affect torque
2007 Nissan Murano lug nut size?
21mm make sure to use a torque wrench and tighten to 93lbs
Do you need to use a torque wrench to loosen retractor seatbelt bolt on vw caravelle?
You don't use a torque wrench to loosen ANYTHING. -It is only for tightening nuts and bolts to the correct torque.
Can you use an automotive torque wrench for gun work?
No
Why shouldn't an impact wrench be used in place of a torque wrench?
An Impact wrench is for a totally different use. A torque wrench will let the user know when a certain torque has been achieved in tightening. The impact wrench is for removing very tough nuts under impact of a hammer.
How do you use an angular gauge on a torque wrench?
After torqueing I would use a regular ratchet with the angle gauge so you don't damage or through off the torque wrench calibration.
What does a mechanic use to tighten nuts?
spanner or a torque wrench
How do you torque a spark plug?
Use a torque wrench with the correct setting for your motor. See related link.
