answersLogoWhite

Top Answer
User Avatar
Wiki User
Answered 2011-06-03 16:13:47

Either the wiper arm(s) moved on the spindle or the linkage moved or bent. See sources and related links below for wiper blade information.

001
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Your Answer

Related Questions


The 1997-2005 Chevrolet Venture takes 24" replacement windshield wiper blades on both sides front and a 16" rear replacement wiper blade.


The 2001 Chevrolet Venture has the most common hook-end wiper arms. See sources and related links below for installation videos. Also, purchase the replacement blades first and there will be additional instructions/illustrations on the replacement packages. Locate and press the tab or button where the wiper blade is inserted into the hook of the wiper arm and pull wiper blade out of hook. You may have to rotate and flex the blade to make enough clearance for the hook to pass through.


I've got a better question, why is this question in the Chevy venture forum ?


Assuming that you mean "wiper blade" (blade and frame) which are replaced often rather than "wiper arm" (piece from the spindle at the hood to the wiper blade) which are rarely ever replaced, the 2001 Chevrolet Venture has the most common hook-end wiper arms. See sources and related links below for installation videos. Also, purchase the replacement blades first and there will be additional instructions/illustrations on the replacement packages. Locate and press the tab or button where the wiper blade is inserted into the hook of the wiper arm and pull wiper blade out of hook. You may have to rotate and flex the blade to make enough clearance for the hook to pass through.


The 2002 Chevrolet Venture has a fairly common hook-end rear wiper blade arm. See related link below for video. Press tab or button that is located in the area where the wiper blade is inserted into the hook. Pull wiper blade out of hook. Sometimes you need to rotate and flex the wiper blade a little bit to make enough clearance.


The wiper blades are different sizes for the driver and passenger side of the 2000 Chevrolet Caviler. The correct size for the driver size is a 22 inch blade. The passenger side is a 17 inch blade.


The 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 & 2005 Chevrolet Venture takes 24" replacement windshield wiper blades on both sides front and a 16" rear wiper blade. Note however, when buying wipers be sure to always lookup your vehicle make, model and year in the application guide book at the store


The 1997-2005 Chevrolet Venture takes a 16" rear wiper blade. (also 24" replacement windshield wiper blades on both sides front). Be sure to lookup exact part numbers for the brand of wipers you choose to purchase. This ensures not only correct lengths, but also correct attachments. See related links below.


You can change the wiper blades by removing the retaining clip to the wiper blade arm. The wiper blade will come off and can be replaced.


It's important to keep the wiper blades on a vehicle in good condition. Wiper blades can remove debris, improve visibility, and aid with snow removal during the winter. An older set of wiper blades can cause several problems: old wiper blades can leave streak marks, scratch glass, and can damage a wiper blade motor. The following guide provides simple tips to install a new set of wiper blades.Measure the existing wiper blades installed on a vehicle. It's important to measure only the rubber part of a wiper blade. Wiper blade measurements are based on the length of the blade that comes in contact with the vehicle's glass. Never install a wiper blade that is too large for a vehicle. This can put excessive strain on a wiper blade's motor.Old wiper blades are simple to remove. Lift the old wiper blades directly away from the windscreen. They should pivot on a 90 degree angle from the base of the blade. The back side of the wiper blade will have a small hinge attached by a spring. Lifting this hinge will allow the old wiper blade to be removed. Most blades will slide out of a slot after the hinge is removed.A new wiper blade should be installed the same way the old blade was removed. Slide the new wiper blade into the empty wiper blade slot. Attach the hinge assembly to the mirror using the spring latch. This will help ensure that the wiper blade can't move. Push the wiper blade back towards the vehicle, and test to make sure that it is securely in place. Never operate an improperly installed wiper blade -- this can result in wiper blade motor damage, windscreen scratches, and a damaged wiper blade assembly.Make sure to recycle old wiper blades when finished. Wiper blades are usually made from aluminum and rubber. Some auto repair shops will pay to recycle old wiper blades. This can be a great way to help the environment while saving money.


All 1995-2005 Chevrolet Blazers take 20" replacement windshield wiper blades on both sides front. The rear wiper blade is a 14".


Take a tape measure and measure the length of each blade.


I had this problem with my 2001 Venture, the dealer replaced the motor and the mechanism. The van was only 6 mos. old..


The driver side is a 24" wiper blade and the passenger side is a 18" wiper blade


This is strictly opinion, however Trico NeoForm beam blades are excellent wiper blades. See sources and related links below to lookup your vehicle's wiper blade sizes.


The 2000 Chevrolet Chevy Impala has hook-end wiper arms and are easy to change. See the Sources and Related Links section below for videos on how to change wiper blades as well as what size wiper blades are on the vehicle (correct attachment and lengths). Tip: if you purchase the replacement blades first, there will also be additional instructions/illustrations on the replacement packages. Locate and press the tab or button where the wiper blade is inserted into the hook of the wiper arm and pull wiper blade out of hook. You may have to rotate and flex the blade to make enough clearance for the hook to pass through.


The 2004 Chevrolet Chevy Avalanche has hook-end wiper arms and are easy to change. See the Sources and Related Links section below for videos on how to change wiper blades as well as what size wiper blades are on the vehicle (correct attachment and lengths). Tip: if you purchase the replacement blades first, there will also be additional instructions/illustrations on the replacement packages. Locate and press the tab or button where the wiper blade is inserted into the hook of the wiper arm and pull wiper blade out of hook. You may have to rotate and flex the blade to make enough clearance for the hook to pass through.


The 2003 Chevrolet Chevy Impala has hook-end wiper arms. See the Sources and Related Links section below for wiper blade installation videos and correct attachment/length wiper blade sizes. Also, if you purchase the replacement blades first and there will be additional instructions/illustrations on the replacement packages. Locate and press the tab or button where the wiper blade is inserted into the hook of the wiper arm and pull wiper blade out of hook. You may have to rotate and flex the blade to make enough clearance for the hook to pass through. Very simple.


The 2002 Chevy Trailblazer takes 22" replacement windshield wiper blades on both sides front and a 16" rear wiper.


You need to pull the complete wiper arm off it's splines and then put it back on the splines in the position that you want the blade.


The Bonneville is Pontiac. See sources and related links below to lookup wiper blade sizes by Pontiac Bonneville model year.


The wiper motor on a 1998 Chevy Venture is up under the vents next to the windshield. It is bolted to the firewall.


The wiper blades that are recommended for a 2006 Jeep Commander are the Trico Flex Wiper Blade, 18inch - 18-180.


The wiper blades on a VW Passat are changed by pressing the blade release and sliding them from the wiper arm. A new blade assembly can then be placed on the arm and snapped into place.




Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.