Torque is not the type of bolt but a type of wrench used to tighten bolts. A torque wrench will tell you how tight a bolt is tightened like 60lb of torque or tighten to 80lb of torque so a bolt will be tight enough to stay in but not too tight that you strip the bolt.
i need to replace the ecm on a 1993 olds cutlass supreme,can i replace it with another ecm from another olds cutlass?
I have a 1993 olds cutlass ciera and the AC fan relay is the one in the middle on my car.
I am trying to take the motor out of a 95' Olds cutlass supreme. The trans. is giving me problems. How many bolts hold it in.
They are hydraulic and not adjustable
this link will help
I HAVE A 1992 OLDS CUTLASS SUPREME JUST BE FOR it warm up it cuts off
what is a 1998 olds moblie cutlass value
Cast iron intake is 30 lb/ft
where is the emc located on a 1988 olds cutlass?
it should be a 15 mm bolt. that's what it is on my 91 cutlass supreme and my 93 beretta.
Injectors are clogged
At the firewall on the passenger side
If power windows in a 1993 Olds Cutlass Ciera don't work there may be a loss of electrical current. Check the battery and fuse. The power motor in the door may need replace.
Where is the water pump on a 1995 olds cutlass supreme?"
how do you drain s 1999 olds cutlass radiatoe
The firing order for a 93 Oldsmobile - Cutlass Ciera S is................ 123. 456 going upwards...that what it is on mine. thanks Dee
Possible loose convertor bolts.
follow top hose of radiator to engine block remove the two bolts , I removed the air filter so i can get to the two bolts easy and that is all
Right next to the passenger side tire. Above the control arm.
Open the glovebox, pull out the black comparment, look down and you will find the fusebox.
12 pints or 8 litres total, but if your just dropping the pan you should only need about 5 litres to top it back up this is due to the torque converter not being drained.
how do you replace a starter on a 1998 cutlass