0
Where do the timing marks on a 94 Mitsubishi montero with a 3.0 sohc point to?
Wiki User
∙ 9y ago
The 1994 Mitsubishi 3.0 liter engine timing marks can be found on the front main pulley. The timing marks will be scattered around the outside of the front main pulley.
Wiki User
∙ 9y ago
Add your answer:
Earn +20 pts
Where should the timing marks on a Mitsubishi montero with a 3.0 sohc point?
The pin in the auto-tensioner slid right out with no resistance. I also measured the auto-tensioner piston runout at 0.17" with a caliper...right where it should be.
2000 2.4 Mitsubishi galant timing mark?
You can go to Autozone.com and ask for the timing marks for a 2.4 on the search bar. One thing, be carfuel because the Eclips has a 2.4 and the marks are different, the Eclips camshaft points to the top and the Galant point to the back.
Where do you point the timing light on your 1976 Dodge Tradesman 200 van with 360 V8 when it's not at the harmonic balance?
The timing marks should be on the balancer and the timing cover. If they are not there, someone removed the window marks.The timing marks should be on the balancer and the timing cover. If they are not there, someone removed the window marks.
WHERE are the timing belt marks on a 1994 Honda civic ex?
The timing belt marks on a 1994 Honda Civic are found on the cam shafts. The arrows will needed to be point a TDC in order to install the belt properly.
Does rotor point to number 1 when timing marks are lined up?
Yes, if #1 is at TDC on the compression stroke.
How do you set timing on 4 cylinder ford contour?
you set timing by the marks on the cam shaft and the crank shaft. they should point at together to make it run right.
How do you line up the timing marks on a Mitsubishi mighty max pickup truck truck with a 2.0 engine in it?
to get into it you need the first piston to go up at its highest and the distributor be pointing to the first spark plug then after you get into play you'll need to play around with the distributor to get a perfect idle at this point you need the timing gun that will help a little more than just by listening to it.
Do the timing marks line up with each other or on the block on an Oldsmobile Eighty-Eight 3.8L?
You're talking about the the marks on the timing gears Right? Because the timing gears have little marks on them. The top gear should have the mark at the 6 o'clock point(down on the bottom), and the smaller lower gear at the 12 o'clock position(up to the top). And these two marks should be lined up with each other.
Where do you set the marks on the cam and the crank on a1990 2500 5.7?
assuming youre replacing the timing chain. the cam and crank sprocket marks are to point directly towards each other.
What are the timing marks and how are they lined up on a 1994 Geo Metro 3 cylinder?
on the balencer there is a timing mark and om the motor theres a tab there is also a mark on the cam gear, when lined up, both marks on the crank gear and cam gear point up.
What does the cam sprocket line up with when putting on a timing chain?
Generally, for most single cam engines, there is a dot or mark on the cam sprocket and a similar mark on the crank sprocket. Point them at each other. the timing marks on the crank and cam sprockets must be lined up with marks on the timing chain in an overhead cam engine
What are the timing marks on a 2.2L Isuzu?
Cams will point straight up to match marks on housing and crank will be at about 1 o'clock where mark on crank pulley will line up with mark on oil pump casing
