assuming youre replacing the timing chain. the cam and crank sprocket marks are to point directly towards each other.
the timing marks are on the cam and crank gears in the timing case.
the cam should be at 6:00 and the crank at 12:00
ita on crank and cam tony ayoub
cam timing marks are on the timing gears inside the timing case cover the crank timing gears are located on the harmonic balance (big pulley wheel at bottom of engine on front of crank)
The timing marks for the cam sprocket on a 98 S10 is on the front. The marks for the crank shaft is on the oil pump gear.
Generally, for most single cam engines, there is a dot or mark on the cam sprocket and a similar mark on the crank sprocket. Point them at each other. the timing marks on the crank and cam sprockets must be lined up with marks on the timing chain in an overhead cam engine
The timing marks are on the timing cover for the crank pulley, and on the cyl head for the cam ...
When you are trying to align the timing marks on a Holden Rodeo 2.6, just get the crank and cam marks aligned, no need to worry about the others. Make sure the belt is tight on the right side between the cam and crank sprockets when they are on their marks. After that simply apply the tensioner.
The marks are on the cam and crank sprockets, and on the timing belt. They all must match.
There are marks on the cam and crank sprockets and plated links on the chain that they line up with.
On a Vauxhall Cavalier Ecotec 2.0L, the timing marks are located on the front of the crank pulley. It is marked under the cam.
The timing marks on a 1991 Toyota Tercel are on the crank pulley. They are located on the front of the pulley and under the cam.