0
At the yoke at the rear end (where drive shaft enters rear end)
Wiki User
∙ 16y ago
Add your answer:
Earn +20 pts
How do you change pinion seal on 2005 Ford Explorer?
how to cahange front pinion seal
Changing rear differential pinion seal on 2003 dodge quad cab 1500 and the torque specs for pinion nut?
210ft. lbs.
How do you fix 2003 expedition rear differential pinion seal leak?
remove rear drive shaft. remove pinion yolk from front of diff.remove oinion seal replace with new one. replace pinion yolk, replace driveshaft,.. dhceck ujoints of drive shaft while out, its a good time to replace them
How do you replace rear main seal for Chrysler 2.7?
You remove the transmission, and the flexplate(flywheel) to access the rear main seal.
How do you replace the pinion seal on the rear end of a 1970 Chevelle?
Best left to a mechanic as the drive shaft has to come down and the big nut on the pinion gear that holds the drive shaft mount has to come off and then you can install the new pinion seal.
How do you replace the pinion shaft seal on your F 350 dually?
to replace pinion shaft seal you need to drop the drive shaft from the rear end then with large socket remove pinion nut from front of yoke remove yoke remove old pinion seal install new pinion seal reinstall yoke and pinion nut to specified torque re install drive shaft note now is the time to check and see if U-joints need replacing
How do you replace the pinion shaft seal on your F-350 dually?
to replace pinion shaft seal you need to drop the drive shaft from the rear end then with large socket remove pinion nut from front of yoke remove yoke remove old pinion seal install new pinion seal reinstall yoke and pinion nut to specified torque re install drive shaft note now is the time to check and see if U-joints need replacing
How do you fix leaking rear axle on 2001 ford expedition?
Pinion seal: Remove the drive shaft from the yoke. Pull the pinion yoke off the pinion shaft. Remove the old seal and hammer on a new one. Seal is about 10 bucks. Re-assemble Rear cover: Remove the cover bolts. Put a pan under the rear end and pry the cover off. Clean and re-silicone the cover Re-assemble. WARNING!!!!! Don't let the rear end run dry, will cost you pinion bearings in a very short time.
Is the pinion seal the same as the front differential?
No. The pinion seal would be at the differential input.
2001 Chevy blazer pinion seal replaced and noise heard now?
It sounds like the pinion nut is not tight enough and the pinion is now moving in and out. This will do bad damage to ring and pinion. You will need to replace crush sleeve in rear end now.
Leak coming from the rear of your mustang gt is the pinion seal or the differential cover gasket?
It may be your differential or your whole rear end or it could just be a worn out gasket.
How do you break the bolt loose for the pinion seal on the rear end 1990 gmc vandura?
with a ipact wrench and a really good compressor
