the back right corner under the hood
water in distributor cap
The clutch fluid and the brake fluid can both be filled in the brake fluid reservoir.
it is located in the distributor under the metal cap.
there is no such thing as clutch fluid He means the fluid for the clutch master cylinder resovoir. Its just to the side of the brake fluid resovoir and usually takes dot-3 brake fluid, just twist off the cap and poor it in.
The fluid is over filled.
if it doesnt have a crankshaft sensor then you have a distributer pick up. Its under your distributer cap.
The air in the antifreeze on a 1993 Dodge Stealth will bleed out if you leave the coolant cap (the cap that screws onto the radiator hose connecting tube, NOT the antifreeze overflow plastic cap) off while the engine warms up. After the thermostat opens when the engine is warm, the antifreeze will start to flow from the engine, through the upper radiator hose, and into the top of the radiator. When you do not see bubbles at the filler neck where you removed the cap, the air should be expelled and you can put the cap back on.
Dot 3 Brake fluid for Clutch master cylinder.ANSWERTurn the engine off before opening the hood.Find the clutch fluid reservoir. It's usually close to the back of the engine, near the brake fluid reservoir.Take off the cap.Check the fluid level. If it is not filled to the top, you will need to add brake fluid. (See "How to Add Brake Fluid to the Clutch Master Cylinder" under Related eHows.)Replace the cap tightly.
There is a reservoir on the clutch master cylinder, mounted to the firewall toward the driver side. It's got a black cap.
Yes , a 1996 Ford Explorer with a manual transmission has a hydraulic clutch ( which uses DOT 3 brake fluid )The clutch fluid reservoir is in the engine compartment , on the drivers side , between the power distribution box and the inner fender
It depends on the brand. The bottles I get at the Dodge dealer I work at have a black cap.It depends on the brand. The bottles I get at the Dodge dealer I work at have a black cap.
Behind the brake fluid resevoiur their is a smaller round resevoiur just remove the cap and fill it to the full mark