The 2001 Mercury Mountaineer came equipped in the 4.0L V6 and 5.0L V8. The idle air control (IAC) valve is component attached to the throttle body assembly. The actual OEM factory part is Hitachi #ABV0015, and the Ford Motorcraft OE replacement is #CX1851.
On a 2001 Mercury Mountaineer with the 5.0 liter V8 engine : The engine oil dipstick is on the drivers side of the engine
The starter on a 1998 Mercury Mountaineer is located on the passenger side of the engine. It is down low, almost underneath the motor.
The starter on a 1998 Mercury Mountaineer is located on the passenger side of the engine. It is down low, almost underneath the motor.
On a 1997 Mercury Mountaineer : The " CHECK ENGINE " warning light is just to the left of the battery voltage gauge
Bottom of the engine block.
what does a insufficient coolant temperature for closed loop fuel control mean and what can i do to fixs it on a mercury mountaineer 1997 engine is a 5.0
Oil pan.
On a 1997 to 2001 Mercury Mountaineer : Check the Vehicle Emissions Control Information ( VECI ) decal located in the front of your engine compartment . It shows what type of spark plug to use and the spark plug gap
The oil pan is bolted to the bottom of the engine
In a 1999 Mercury Mountaineer : In the Power Distribution Box ( which is " live " ) located in the engine compartment , on the drivers side of the engine compartment ( relay # 5 is the fuel pump relay )
For the 1997 to 2001 Mercury Mountaineer : The Powertrain Control Module ( PCM ) is located in the engine compartment . You will see where the wiring harness is bolted to one end of the PCM . It passes through the firewall ( most of the PCM is " hidden " behind the glove compartment area
In a 1997 Mercury Mountaineer : In the Power Distribution Box ( which is " live " ) located in the drivers side of the engine compartment ( relay # 2 is the horn relay )