Generally, if bank one O2 sensor has failed, bank 2 will fail soon, assuming it's either a V6 or V8. Inline engines only have the front O2 sensors. It's a good idea to do both at the same time if it's V configuration engine. They are on the exhaust manifold, right before the connection to the headpipe. It will be the only thing connected to the exhaust that has wires.
wHereis the abs wheel speed sensor located on 1998 Oldsmobile bravadaI
It is located under the motor, front and center. To access it, you must get under the vehicle.
yes They are all the same on the body parts
The PCV valve on a 1998 Oldsmobile Intrigue is located under the MAP sensor. If you remove the large plastic cover with 3800 written on it and look to the left side of the engine there is a sensor marked (Pressure Sensor) with 3 wires going into it. Unplug that sensor and turn it counter clockwise and lift it off and you will see the PCV valve under it. Here is a picture to go along with my answer. http://autorepair.about.com/library/illustrations/bl795lib.htm
The 1998 Oldsmobile Intrigue throttle position sensor is held in place with two retaining screws. Remove the retaining screws and the wiring harness. Reverse the process to install the new throttle position sensor.
I believe it is located underneath the front bumper.
never use it
Yes
12.3 quarts
The 1998 Oldsmobile Intrigue gets an estimated 19 mpg in the city. The vehicle gets an estimated 30 mpg highway mileage.
The Antenna is built into the rear window.
R-134