Want this question answered?
location and replacement of pcv valve and egr valve on 2005 Ford Taurus se
La Valvula PVC se encuentra dentro de la caja del filtro de aire It depends on what engine you have -1.8 or 1.9. On the 1.8, the pcv valve is on the valve cover; on the 1.9, the pcv valve is on the crankcase vent tube.
the pcv is located on the right top side of the valve cover. it has a hose connected directly to the crankcase cover.(on my car the cover is red)it is simple to replace and costs dirt cheap.NEVER open the hose and take off the pcv when hot. use a wescott for simplicity. specs for 1992 Nissan maxima se, single overhead cam, probably the same,different pcv for dohc though.
where is the pvc valve on a 2002 ford focus dual overhead cam ztec 2.0
it is located at your valve cover driver side on the end of the hose the pcv valve is pluged into the valve cover at the end of the hose you may have to use a screwdriver to pry it out of the hole. is it a straight blk hose the goes to the fuel rail
The 3800 in the SE is the same engine as in the GT. Check out the following website for pics and instructions on how to change. http://macgp.clubgp.com/howto/engine/pcv/gt/pcv.html Hope this helps. "G"
Mine was in the bottm corner of the plastic box that holds the air filter
The PCV valve is located directly ontop of the engine block and is connected by a rubber hose on one end connected into the engine with the other end you will find it on the lower right (topside) of the engine : D
It is located in the Southern part of Africa where Indians are.
WE need to knw which engine you have: 2.0 Zetec, 2.0 SPI, 2.0 Zetec VCT?
regularmente se encuentra de bajo del aciento tracero del lado del conductor
on the right side of the throttle body