There is none.
How I can replace ignition switch cylinder from Isuzu Rodeo?.
Where is my filter for my 97 ISUZU RODEO
where is the pcv valve located on a 1995 Isuzu rodeo v6 3.2l
what type of transmission fluid used for a 97 Isuzu rodeo
How to remove the starter from a 1997 Isuzu Rodeo 4X4 automatic
The cam diagram for the Isuzu Rodeo 1998 2.2 can be located at Rock Auto and Isuzu.
Replace switch or "jump wires" on switch to operate windows Replace switch or "jump wires" on switch to operate windows
The EGR valve on a 95 Isuzu Rodeo is located on the back top of the engine. It resembles a cylinder.
Isuzu rodeo 3.2 V6 LS.
On a 1997 Isuzu Rodeo, the oil filter is located on the bottom front of the motor beneath the fan.
there is not one
The shift lock solenoids are located on the valve body on a 1999 Isuzu Rodeo. There are two shift solenoids.
On a 2002 Isuzu Rodeo, the thermostat is located at the end of the top radiator hose on engine. It is situated under the intake manifold.
Depending on the transmission type, the neutral safety could be located in several places on the transmission. If the switch is bad, the Rodeo could either start in any gear, or not start at all.
its built into the starter
Under the hood.
A 1998 automatic transmission may not work very well on a 1999 Isuzu Rodeo. This is mainly due to the incompatibility of the two engine systems and some modifications may need to be made.Ê
The freezer plug in a 3.2 Isuzu Rodeo is a easy find. The freezer plug is located on the left side of the engine.
The oil in a 1993 Isuzu Rodeo is put into the reservoir that is located on top of the valve cover. There is a cap that has to be rotated to remove it.
replace stop light switch
The last Isuzu Rodeo was in 2004.
It is located under the timing belt cover.
adjusting Isuzu rodeo brakes