If it is a 2.0 dohc 16 valve engine it is on the front driver side of valve cover. You will need to remove plastic air intake hose.
where is located theknock sensor 97 mitssubishi eclipse
yes it dose, it has a cam sensor and a crank sensor,
Yes
The 94 and 95 are the same,no cam sensor.1996 and 1997 are differant in one way.The 1996 and 1997 have a cam sensor. .The 97 has a cam sensor and the 94 does not.The 1996 has a cam sensor too.
Cam sensor, thats about it, there aren't any other names for that sensor.
the cam angle sensor is the crank angle sensor it preforms both jobs
No you can not. It MUST have it to run.
It should be next to one of the cams, is it a single cam or dual cam?
The cam sensor is mounted on the left side of the engine. It is near the oil filter, you may have to look under the engine to see it.
the cam sensor reads speed and works with the crank position sensor to tell your coil packs when to fire your spark plugs and what cylinder to fire on
It is inside the distributor
It is part of the distributor. You have to replace the distributor