It is located next to the transmission. This should help you. http://www.corvetteamerica.com/cf/displaylearnmore.cfm?learnmoreid=328&idlist=p_41407,p_41408,p_35688,p_28785,p_33490,328,p_44829,p_44622,p_44673,327,p_41409,p_44676,p_44674,p_44672&searchdest=%2Fcf%2Flearnmorelist%2Ecfm%3Fsubcategoryid%3DX735&subcategoryid=X good luck there should be a bleeder valve on the slave cylinder.Bleed it in the same manner as a brake job. good luck
sounds like air in the system, to properly bleed the slave cylinder you must remove the mount screws and hold it so the bleed port is up
figure out how to change master clutch cylinder and slave cylinder,then bleed the system properly
if i replace slave cylinder in 1994 Honda civic ex will this make my clutch disengage and engage correctlyanswerchange master cylinder and slave properly then bleed the system properly.
The clutch can't be adjusted. It is an hydraulic clutch. The clutch pedal sends pressure from the master cylinder to the slave cylinder on the clutch. IF you are having trouble with it the thing to do is bleed the air out at the slave cylinder. Have an assistant pump the clutch and hold it to the floor. Then open the bleed valve on the slave cylinder to let the air out of the system. On the final bleed hold the clutch to the floor and close the bleed valve on the slave cylinder. The clutch master cylinder operates of the brake fluid reservoir. Make sure you keep this full of brake fluid as you bleed the clutch.
after the clutch master cylinder has been replaced.
The fluid is leaking from the master cylinder and running back towad the pedal. Replace the master cylinderanswerchange master cylinder and slave properly then bleed the system properly.
first check your clutch slave cylinder for leaks, if its leaking ,replace and bleed system,if its not leaking,bleed system ,dont forget to bleed clutch damperand if its still not right, then replace clutch master cylinder.
how do you bleed the clutch master cylinder in a 2005 mazda 3
On the clutch slave cylinder
Need to know how to assemble 95 Chevy clutch master cylinder?
To bleed a clutch on a Nissan Stanza, you need to find the bleed-off valve, usually somewhere near the slave cylinder.
Bleed the clutch line that runs from the clutch master cylinder to the slave cylinder utilizing the bleed valve on the slave cylinder.