Behind the harmonic balancer (dampner) that is located behind the crankshaft pulley.
the crank sensor is behind the harmonic balancer
Nee more info cutlass supreme or cutlass ceira which engine 3.1-- 3.8-- 3.3-- ????? Oldsmobile cutlass ceira 3.3 liteer engine
3.1L dont have a crank sensor
1991 probably doesn't have a crank sensor, it probably has a reference in the distributor.
A 1991 doesn't have a crank sensor, it only has a distributor pick up plate(cam sensor)
price on replaceing ball joint 1993 cutlass supreme
No crank sensor, only a cam position sensor.
its a 02 sensor it measures the oxygen coming out of your engine
1991 to 1993 3000gt do not have a crank sensor. Only a cam sensor. And when does go out the car will not start or have a very irregular idle.
No crank sensor, just the pick up plate in the distributor.
No crank sensor on a 1990, only the pickup plate (cam sensor) in the distributor. how about a 1991?
Where is the choke sensor on a 1991 Oldsmobile ciera 3.3L
You have to put it in the overflow tank.
No crank sensor, only the sensor in the distributor.
there isn't one
The O2 sensor is located on the rear exhaust- driver's side. Easiest to get to if you rotate the engine forward and away from the firewall. I have used regular wrenches even though they sell O2 sensor wrenches.
With money take it to someone who knows.
You can't, its done by the computer if you have a knock noise, replace the knock sensor. its locate on the back of the engine near the alternator.
I have a 92 cutlass ciera doing that, would run til it got hot, then die...ended up being the crank shaft sensor. hope this helps
i would say because it is not getting spark but i have a 77 cutlass with the same problem so check it for spark
Driver side of the bell housing.
no it does not... only the 1.6 has one
You adjust the timing by moving the crank angle sensor. The crank angle sensor is driven by the camshaft closest to the intake manifold (passenger side of the engine) and is located behind the cylinder head and valve cover. Losen the bolt that secures the crank angle sensor, in order to move the crank angle sensor.
The most obvious thing to check when a 1991 Oldsmobile Cutlass Supreme won't start is to make sure that the vehicle has gas. You should also check the battery. If the car clicks when you try to start it, it is likely the alternator.