the crank sensor is somtimes located on the top of the oil pan. i know it is atlest on the 91. side of the block just below the exhaust manifold it takes a 10 mm socket
The 1995 Pontiac Grand Am 3.1 liter engine crank shaft sensor is located inside of the rear engine cover. You will need to remove the rear engine cover in order to access the crankshaft sensor.
The 1999 4.7 liter engine temperature sensor is located just above the thermostat housing. The sensor will be on the front of the engine.
The thermostat on a 1999 2,4 liter Grand Am is located on the side of the engine. The thermostat is on the drivers side of the engine a few inches from the top.Ê
There are many 4.3 liter engines. In order to know where the oil pressure sensor is located in a 4.3 liter engine, the brand would need to be known.
well were is it
The oil pressure sensor is located on the back of the engine, next to the distributor.The oil pressure sensor is located on the back of the engine, next to the distributor.
This is referring to the first Oxygen sensor, located on the exhaust manifold. It either indicates a short in the wiring or the sensor needs to be replaced altogether.
It is the sensor in the outlet of the catalytic converter.
The 2006 Ford Super duty 5.4 liter engine had temperature sensor is located on the side of the head. The sensor is near the front of the head.
The vehicle speed sensor (vss) should be located on the driver side on the front of the transmission close to the axle. Their should be an ear protruding out from the transmission, and the sensor will be to the right of it.
The 1990 Isuzu 2.8 liter engine MAF sensor can be found on the firewall in the engine compartment. The sensor will be on the passenger side of the firewall.
It's located behind the crankshaft pulley bolted to the engine block.