You might also want to clean out the intake port located in the throttle body. That was my problem. All I needed to do was remove the air intake cover to the throttle body and take a small bristle brush and clean out the exhaust intake. It wasn't getting efficient air intake and that is why my code kept coming up.
I just completed the full top end cleaning on a Honda 3.2 L engine. I found it to be a fairly simple task for a home mechanic. The main thing I found was a carbon blockage where the vacuum tube comes out of the back of the intake and goes to the vac solenoid on the left side fuel rail. Easy to clean. just pull the vac tube off of the fuel rail and spray carb cleaner thru to the intake. after I performed the complete upper end cleaning My engine light went out.
my Honda passport is having a problem.troubleshooting of p0401.the gas recirculation(egr)flow insufficient aadetected.
there is no dip stick in a Honda passport 2001 closed system
where is the pcv valve locate on 95 Honda passport
Probably a clog in the EGR
i need to know where the tail shaft is located on a 2001 handa passport?
P0401- Exhaust Gas Recirculation insufficient flow. Probably need to clean or replace your EGR valve located on the back of your intake.
The fuel filter on a 1996 Honda Passport is located underneath the vehicle close to the gas tank. The filter will have bolts holding it in.
Trouble code P1153 means: HO2S Insufficient Switching (Bank 2 Sensor 1)
Trouble code P0401 means:Exhaust gas recirculation flow insufficient detected
Trouble code P0401 means:Exhaust gas recirculation flow insufficient detected
Check
The water pump on a 1999 Honda Passport is located behind the timing belt cover. The radiator and timing belt have to be removed to access the water pump.