It is in the gas tank, you will have to remove fuel tank to service the pump.
Yes, but you have to remove the automatic transmission housing, and you have to replace the Torque Converter with a standard transmission clutch that matches the type of transmission with which you are mating the engine.
Need to know the year, make, model, engine and which dip stick you are looking for, the automatic transmission or engine.
$3,100 to $3,300
I went to Lincoln Tech Auto school and the Professor in my Automatic Transmissions class told me the best thing to do, to clean out your engine is to put Automatic Transmission fluid in it and run it over the weekend and then change it out with regular motor oil.
It is located between the back of the engine and the transmission. It houses the flywheel and clutch if it is a standard or the flex plate and the torque converter if it is an automatic transmission.
That would be the 4L60E transmission.
Yes but the bolt patter is different so you will have to find an adaptor. Read below
You should never add transmission fluid to a Chevrolet 350 engine. You can add transmission fluid to the transmission through the transmission dipstick holder.
Yes, but you have to remove the automatic transmission housing, and you have to replace the Torque Converter with a standard transmission clutch that matches the type of transmission with which you are mating the engine.
Bottom , rightside of the engine I believe .
That would be a 4L80E automatic transmission.
No
wich one radiator, engine or transmission (manual or automatic)... wich one radiator, engine or transmission (manual or automatic)...
No
No. The 8.1 and the 6.6 are equiped with the allison
Standard cab with a 4 cylinder engine and automatic transmission is rated at 5600#. Standard cab with a 4.3 V6 engine and automatic transmission is rated at 6000#. Extended cab with 4.3 V6 engine and automatic transmission is rated at 5500#.
The question is if the transmission is a standard or an automatic, if it is a standard then the transmission is located directly behind the bell housing which is bolted onto the rear of the engine, if it is an automatic then the transmission is bolted directly to the rear of the engine