check under the hood of the vehicle...there should be a rectangular or square box with fuses there...there is also one under the dash of the vehicle. If it isn't the fuse check the bulbs...
check the switch under the dash where the brake pedal rests in may need adjusting, broken, or just stuck in and not popping out when you apply the brake. Push it in and out severel times and see if the lights come on.
Could be a fuse or could be a bad bulb. See sources and related links below for bulb part numbers.
Brake lights and turn signals are on a separate circuit from the tail lights. Tail lights are on the same circuit with the dashboard lights. If the dashboard lights aren't working either, check the fuse. If they ARE working, check the headlight switch.
brake lights dont work
if i read that right lol all cars do that that is just the way they are set up if ur lights arent on your brake light dont need to be on hell as long as someone sees your reverse lights ur fine but anyways all cars do that
change the brake lights check the fuse check the brake light swtch
Check the fuse, the bulbs, and the brake light switch.
The right brake light does not work on 1999 Ford Windstar. Tail lights and blinking light works. Changed bulb more than once, changed the plug in where the bulb goes but it still does not work. The tag lights are not working either.
the bulb has 2 filaments. One may not be working. Try replacing the bulbs. Or, there is a bare section on the wires that lead to the bulb.
all my lights work except my break lights, when i push on the peddle they dont go on can you help me?
I dont know because i dont have a FORD Check your brake light switch on the back of your brake pedal for adjustment.
Check for power at brake light switch Check for power and ground at the brake light sockets open wire?
Brake pedal switch, wiring, bulbs, bad trailer harness (if there), fuses...