It's directly underneath the throttle body and anchored to the throttle body by screws.
I dont know what other egr valve will work, but I know they can be cleaned out and put back on the car. I have a 96 Paseo, and I soaked mine in carb cleaner and was able to get all the carbon out and put it back on the car and works fine.
The VSV is located on the intake manifold side of the emission control valve set.
The PCV valve is located on top of the valve cover in the middle.
Remove the heater control valve and replace it.
Could be EGR valve sticking open or dirty at an idling condition or hesitates when accelerating.
Where is the PCV valve located on 97 Toyota Camry and how to replace it.Read more: Where_is_the_PCV_valve_located_on_97_Toyota_Camry_and_how_to_replace_it.
Show me where that air valve control valve is located on a 2000 navigator
To remove the valve cover on a 92-97 Toyota paseo. Remove the spark plug igniters from valve cover. Remove crankcase ventilation valve(black plastic 90 degree elbow) from valve cover and intake manifold. remove the fiev nuts on th top o the valve cover. place a pry bar between cylinder head and valve cover at the corners where they have left a gap. Pry slowly and easily. be sure to work all corners not just one.
You dont , it is controlled by the ECU , the is an "Idle Speed Control Valve" Which is located under the throttle body. should check it to see if the valve inside of it is stuck .
It does not have a heater control valve.It does not have a heater control valve.
The PCV valve on a 1997 Toyota Avalon is located on top of the engine. It connects the left valve cover with the intake.
In the 2001 Toyota Corolla the evap purge solenoid valve is located near the underside of the air cleaner. This is an emissions control device.