There is a bleed screw on the thermostat housing. Remove the screw with the engine loose. Ounc you have pure coolant and no air you can close off the bleed screw.
how do I bleed my power steering pete thank you
How do you. Bleed tear brake
no
normally you keep turning the steering to full lock both sides and the pump should bleed itself.
There is a small brass valve on the top of the thermostat housing where it attaches to the top radiator hose. Loosen it and then fill the radiator until coolant comes out of the valve and then quickly close it. This is only for an impala with the 3.8 liter engine though I believe there are two valves on the 3.4.
there should be a air valve on the engine that you can bleed the bubbles out of the cooling system.
There is a bleed screw on the thermostat housing. Remove the screw with the engine loose. Ounc you have pure coolant and no air you can close off the bleed screw.
The same way you bleed brakes on a newer car, bleeder valves are in back of the wheel cylinders on the backing plate.
It should bleed its self when turning lock to lock while engine is running.
shoot it
steering systems do not need to be bled, the air will be cycled out and into the reservoir.