The safety switch to start the motor on a Ranchking riding mower is located in the ignition. If the clutch needs to be depressed several times before the mower will start, there might be a problem with the adjustment of the clutch.
If the clutch won't engage, the clutch disc or pressure plate has probably broke apart. If the clutch won't disengage, the clutch hydraulic fluid reservoir is empty because of a leak in the system.
The clutch pedal.
An air conditioner clutch will not engage without voltage. If it doesn't engage, the compressor will not turn.
Is to disengage and engage
have you tried checking the clutch master cylinder? not sure if the same as others ive done, but usually its right behind the clutch peddle.
bad clutch cable, or not enough oil on the clutch plates.
you need to bleed your clutch fluid
it might not have any hydrolic fluid in the clutch master cylinder to engage the cluth or your clutch might me shot and just won't engage at all meaning you need a new one (was there a smell in the car right before you couldn't use clutch? that might of been the clutch burning up). don't quote me on all that I'm just telling you what you can check.
thats the relay to engage the a/c compressor clutch
check the clutch fluid or maybe you need to purgue
The torque converter and clutch are the point where the engine and the transmission engage.
When you engage the clutch and the engine sits there spinning: it get's no traction OR when there is no pressure on the clutch pedal: pressing it changes nothing.