How do you replace a slave cylinder in a 96 chevey k1500
should be located on the bell housing
The slave cylinder is inside the trans. If you need to replace it you will have to pull the trans out. Its not that bad, its a afternoon though.
The clutch slave cylinder is located inside the transmission bellhousing. The transmission must be removed to gain access.
The clutch bleed valve on a 2.2 liter Chevy Ecotec engine is located on the slave cylinder. To find the slave cylinder remove the battery, as it is mounted underneath the battery tray.
where is the slave cylinder located on a 2004 satern vue
The slave cylinder for your hydraulic clutch is located inside the manual transmission bellhousing
You will have to remove the transmission and then look inside of the bellhousing and you will see the slave cylinder bolted in with 2 10mm bolts. remove the 2 bolts and slide the slave cylinder off the jack shaft.
slave is on passenger side near your starter// follow the line from the master cylinder if you get under the truck behind the front passenger wheel you won't be able to miss it.
The slave cylinder for a hydraulic clutch is located inside the manual transmission bellhousing
the slave clutch cylinder is located behind the engine directly above the flywheel on the Transmission
The slave cylinder for your hydraulic clutch is located inside the transmission bell housing