A signal from the temperature sensor on the engine.
Where is radiator temperature sensor located on a 1997 2.4L Chevy cavalier
engine coolant temperature sensor is faulty. engine coolant temperature sensor is faulty. engine coolant temperature sensor is faulty. engine coolant temperature sensor is faulty. engine coolant temperature sensor is faulty.
The engine coolant temperature sensor is usually on the front of the engine. The coolant temperature sensor will be in the vicinity of the thermostat housing.
Facing the engine, it's on the top left. It can be seen without moving anything.
The themostat is located in the top rad hose on the engine side, but I don't know about the sensor. In my 91 the coolant temp sensor is in the thermostat housing and the engine temp sensor is on the block.
The device that controls engine temperature is called a thermostat and it's usually located where the upper radiator hose connects to the engine.
The coolant temperature sensor on a 1999 Mondeo is located on top of the engine, in the intake manifold. It constantly updates the vehicle's computer and controls the cooling fan.
Likely a faulty coolant temperature sensor. Change the sensor.
the coolant temp sensor( cts) reads the temp of the engine and adjust the fuel air mixture depending on the temp. if its cold out the sensor will adjust for more fuel to ease the start of the engine. ADDITIONAL: The Coolant Temperature Sensor measures the temp of the coolant, not the engine. The sensor controls the thermo fans on/off. depending upon temperature. The actual engine temperature sensor is on top of the engine and does not control the fans. If the fans do not switch on at any temperature, disconnect the 2 wire connector from the sensor (Usually at the bottom of the radiator) If fans start up with connector disconnected, replace the sensor.
The knock sensor for the 1993 Chevy Cavalier is located in the back of the motor. It can also be located in the engine valve.
It is on the drivers side head, Back by the last spark plug by the cab.
The temperature sensor for the coolant system is located on the front of the engine. The exact location of the coolant temperature sensor is dependent upon the year of the engine.
The temperature sensor on a 2004 Neon 2.0 engine is located on the driver side of the engine below the cam sensor.
what size engine 2.2
The knock sensor is located on the side of the engine block near the bellhousing
The 2003 Mazda engine coolant temperature sensor is located on the front of the engine, above the thermostat housing. The sensor will have to wires leading to it.
A coolant system temperature sensor controls it. : CHILTON calls it the cylinder head temperature sensor. Some after market manufacturers call it the coolant temperature sensor. These are equivalent.
The intake air temperature sensor is located in the air intake system. The system uses a plastic housing which flows throughout the engine bay. The sensor will be mounted near the air filter box.
Your engine coolant temperature gauge has a sensor ( there is also a engine coolant temperature sensor that is used for the computer / PCM )
The crankshaft sensor is mounted to either the front side or the back side of the engine block depending on engine type
There should be a second sensor, located near the exhaust manifold. One snesor controls the fan, the other controls the gauge.
temperature sensor 2003 Chevrolet cavalier
The 1993 Chevy S 10 Blazer 4.3 liter engine temperature sensor can be grounded to the engine block. You can use the temperature sensor retaining bolts to ground the temperature sensor.
There is a sensor on most modern cars which turns on the fan when the coolant temperature reaches a certain value. If this sensor is bad, the fan may run continously.