en la manguera inferior tiene una caja de forma esferica con tres tornillos , tien que hacerlo con el carro totalemte frio sin prenderlo pues tiene agua caliente y ud está abajo de ella y puede quemarse si esta caliente.
The thermostat on a 1993 Mazda 929 is located on the top of the motor just before the manifold covers. Look for the largest hose coming from the radiator at the top and trace the length of the hose back to its connection to the motor and the thermostat is at the point the hose connects to the motor.
The Thermostat is located at the low side radiator hole housing ( one end of the hole is connect from the radiator and the other end is connect to the housing
The thermostat, on your 1992 Mazda, can be found on the front bottom portion of the engine. You can follow the water hose from the bottom of the radiator to the thermostat.
What is a timing cover seal on a 1992 mazda 929 and where is it located at?
you have to remove the dash and every thing attached to it. Is it the same for a 1988 Mazda 929?
WHERE IS THE FUSE BOX IN MY 929 MAZDA AND WHERE. HOW DOES THE ENGINE CHECK LIGHT LOOK AND LAST WHY IS IT ON AND STILL RUN
It's where the lower hose meets the engine!! follow the upper radiator hose to the engine, and it is under a dome where the two meet.
In the engine bay. Infront of the stuts
Not getting fuel or spark?
its located in the rear towards the drivers side
The 1994 Mazda 929 dryer receiver is located on the firewall in the engine compartment. The dryer receiver will be on the passenger side of the firewall.
On most cars the thermostat is on the top hose, but not this one. Find the bottom large hose and trace it up, there you will find three bolts to remove the lower cup that holds the thermostat. Be carfull because the uperhose has water in it, and your working right below it.