In both the 4 & 6 cylinder models follow the upper radiator hose to the engine block, the piece it connects to is the cover with the thermostat in it. I just did the a 94/4.0 V6 and the bolts are a bit tight to access. Ensure you have a flex socket handle. I found the steps in the Haynes manual for this vehicle.
is in side of the rear main fiuse box
follow the top radiator hose to the engine, the thermostat is located in the housing that that end of the hose is connected to
There is supposed to be an engine thermostat . Do you mean that someone has removed the engine thermostat ? What year of Ford Ranger and what year ?
follow the top radiator hose to the engine, remove it then remove the thermostat housing, remove the thermostat and replace it
follow the top radiator hose to the motor the hose is clamped to the thermostat housing remove the housing and you will find your thermostat
The thermostat is located on the right side of the engine looking in, in between the intake manifold and the air filter box, underneath the wiring. This is in a 1994 Ford Probe GT 6 cylinder
It should be located in the oil pan. On my ranger its on the drivers side.
yes if the motors are the same.
Should be less than/around $10.00.
The thermostat is done it has to be replaced.......
A 1994 Ford Ranger has no distributor cap__it uses Distributorless Ignition__the ignition coils are located on the right side of the engine in plain sight (your left when facing the engine )
1994 ford ranger starts once in awhile
are there struts or shocks on the front of a 1994 ford ranger 2wd
where is the thermostat located on a 1989 ford tempo
The thermostat on a 1984 ranger is located in the lower radiator hose housing connected to the engine, not the top like most vehicles..Fairly easy to replace. Just remove the bolts.. then the housing and the thermostat.
do you have to remove fan shroud to access thermostat housing on a 1997 2.3L ford ranger
The 1992 Ford Ranger 4.0 liter had a 197 * Fahrenheit thermostat from the factory
follow top radiator hose to the end .thats the thermostat housing.on drivers side of the engine
Follow the top radiator hose back to the engine. This is where the thermostat is. Remove the 2 bolts and there it is.
What size is the steel brake line tubing on a 1994 Ford Ranger
The lug pattern for a 1994 ford ranger is 5x4.5. It is the same pattern that ford and dodge have used for years.
Under the body, on the driver-side, on the frame.
right behind the motor an in front of the transmission its where they meet
hey, you kick it but not to hard that you break it