Want this question answered?
Turn signal bar?
Pull headlight switch - left side of dash
wiring diagram ignition switch el camino 71
The 1985 Chevrolet El Camino ignition switch can be removed by loosening the retaining ring at the top of the switch. The switch will slide out. Remove the wiring harness from the back of the ignition switch.
purple
You will need to remove the retaining ring at the top of your 1979 Chevrolet El Camino ignition switch. The ignition switch will slide out. Remove the wiring harness. Reverse the process to install the new ignition switch.
Should be located in or near the fuse box - just unplug or in my case (85 el camino)there are two flashers behind the brake release under the dash,not down by the fuse box. (87) El Camino same place. Had to remove 6 screws to get to it. Look left and up (back towards driver) should be standard 12v flasher for both.
Where is the turn signal flasher relay placed on a Ford Falcon EL?
Where is the turn signal flasher relay placed on a Ford Falcon EL?
make sure the bulb is good take the bulb out of the otherside and install it in the driver side. if it still does not work then chck the ground and power do this with a twelve volt test light, you can purchase one at any hardware store. good luck
what was the el camino real and what was its purpose
where is the vin no in a1972 el camino