There are two engine coolant temperature sensors. One drives the gauge or warning light on the instrument panel generally referred to as the sending unit. The other is used by the computer to determine engine coolant temperature and adjust the fuel/air mixture accordingly; this is generally referred to as the sensor. The two are easily distinguished, since the sending unit for the temperature guage has only one wire going to it, while the unit that provides information to the computer has two or three wires to it. On V6 engines, the sending unit for the gauge is located on the front lower part of the intake manifold, near the thermostat housing. - Mazda Pickups Service Manual
Iy is located on top of the large, black air intake tube- just after the air filter housing.
under the termostat housing.
The intake air temperature sensor is located on the mass air flow sensor on the intake. There are five wires attached to the sensor.
where is the inertia switch on a 626 maza 1994
The 2003 Mazda engine coolant temperature sensor is located on the front of the engine, above the thermostat housing. The sensor will have to wires leading to it.
you can't fix a sensor, you can replace one by removing it and installing the new one...:)
Iti's mounted to the transmission. You will need to go under the car and look for it. Hope this will help.
There is a coolant temperature sensor and a temperature gauge sensor. the coolant sensor is located on driver side of the cylinder head. screws right into it, and the temperature gauge sensor is on the front side of the cylinder head right under the distributor. hope this helps
Where would the knock sensor be located on a 2004 mazda 6?
99 mazda b3000 where is the speed sensor located
I don't think it has a knock sensor ( I know that the 4.0 liter V6 engine in my 1995 Ford Explorer doesn't have a knock sensor )
I don't think it has a knock sensor ( I know that the 4.0 liter V6 engine in my 1995 Ford Explorer doesn't have a knock sensor )