The fuel temperature sensor is located inside of the tank in the Subaru Impreza. This is the case for the cars that were made in the 1990's, at least.
it is in the water manifold
I have a 2008 Subara Impreza. When should i change the timing belt? Do i also need to change the cogs, tension bars and water pump??
Water pump is located behind the timing belt cover and is driven by the timing belt. The thermostat is located on the bottom of the engine. Remove the two 10mm bolts from the plastic housing that the lower rad hose is connected to.
Get a manual on your car from AUTOBOOKSONLINE.COM.
water born paint made by BASF (one of the best today)
Hi, this is a common problem with subaru's - you need to get the cooling system pressure bled - i.e there is air in your cooling system.
The coolant temperature sensor, on your 2002 Nissan, is located on the front of the engine. The sensor is just above the water pump.
The temp sensor is located on the intake manifold
It is the sensor located in the water pump. It is a 2 prong plug, screwed straight into the front of the water pump. The other sensor that is located in the cylinder head is for your gauge.
the camshsft sensor is located under the water pump.you can`t see it,you have to feel for it
The water temperature sensor is located on the front of the engine. You will find the sensor behind the thermostat housing.
The water temperature sensor on your 1991 Honda accord, is located on the front of the engine. The sensor is above the water thermostat housing.
Subaru recomend every 60,000 miles but should be changed evry time major work eg. changing water/oil pump, head gasket ect Peter from newcastle, mechanic for 8 years
It depends on which of them. The one for coolant is located in the water inlet. Ambient temperature sensor is located in the filter box.
water temperature sensor located near steering colum..
if you follow the lower radiator hose toward the engine, the thermostat housing is located at the end closest to the motor. I would HIGHLY recomend having a reputable shop change it, the bolts VERy commonly break in subarus, than you have to replace the whole water pump, which also includes a timing job.
The coolant temperature sensor on a 1998 Honda Accord is located next to the thermostat housing. The sensor has a blue clip located on the right side of the engine compartment.
The engine coolant temperature sensor is located at the timing belt end of the engine on the water outlet casting.
Water appearing to be coming from the center of the enginge may be a leaking water pump. When the water pump begins to fail, water runs from behind the timing belt cover which may seem to be comming from the center of the engine. Hope this helps. Claude
It is located on the bottom of the radiator
IS CALL CAMSHAFT SENSOR AND IS LOCATED ON THE RIGTH SIDE OF THE ENGINE , ABOVE THE CRANK PULLEY You will have a crank sensor, but it won't have a cam sensor. it dose have a cam sensor, on the timing cover left sind of water pump
The cam shaft sensor is located behind the water pump pulley. One bolt that holds it in place.
Located just below thermostat
The Temperature sensor for the computer is on top the head. The temperature sensor for the temperature gauge is located under the Thermostat housing.
The sensor is on the front cover near the water pump area.