Auto Parts and Repairs
Heater Cores and Blower Fans
Jeep Cherokee Sport
Jeep Grand Cherokee Limited

Why does the blower motor only work on high even when the ignition is off?

555657

Top Answer
User Avatar
Wiki User
2015-07-17 17:41:53
2015-07-17 17:41:53

it's a problem with the blower motor resistor,

1
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions

User Avatar

Sounds like the blower motor resistor. I just had the same problem in my '94 Grand Cherokee. I went to the scrap yard and got the same part for $20. The dealership wanted $200.

User Avatar

the resistor for the blower motor is busted blower works on high with out it

User Avatar

Bad resistor at the blower motor? Bad blower motor switch?

User Avatar

The blower motor fuse protects the blower motor electrical circuit. The blower motor relay operates only the high speed function of the blower motor. The blower motor speed resistor operates the lower speed functions of the blower motor.

User Avatar

A blower motor that only works on high is normally caused by a defective Blower Motor Resistor Pack. DRL, do not have a clue.

User Avatar

from what i have read it is the blower motor resistor it goes bad and only lets the fan run on high google blower motor resistor and read on

User Avatar

The blower motor resistor has failed.The blower motor resistor has failed.

User Avatar

When you beat the blower motor, you are probably shaking the blower resister. The resister is what controls the blower speeds and is probably bad or loose.

User Avatar

The blower motor high speed relay is located under the hood, on the passenger side firewall close to the blower motor. The blower motor speed resistor is also located in that same area.

User Avatar

If you are referring to the blower motor only working on the high speed setting, then the problem is the blower motor Resistor Pack is defective. Replace it. It can be the blower motor speed control switch but not likely.

User Avatar

The blower motor speed resistor is burned out. The high speed function bypasses the resistor. The speed resistor is generally located near to the blower motor.

User Avatar

The blower motor speed resistor is burned out.

User Avatar

A typical blower motor relay only operates the high speed function.

User Avatar

the heater resistor needs to be replaced it is mounted in the heater box next to the blower motor

User Avatar

Not knowing what year S10 you have, you can generally find the blower motor high speed relay nearby the blower motor on the firewall. The resister for the other lower speeds is also found close by the blower motor.

User Avatar

If the blower motor randomly and intermittenly quits and does not work, chances are good the blower motor itself is faulty, if the blower motor does not work on all fan speeds from low through high, it most likely needs a blower motor resistor.

User Avatar

Either the blower motor fan switch is bad or the blower motor resistor pack is defective. It is more than likely the blower motor resistor pack.

User Avatar

If it has only high speed, the blower motor resistor has to be replaced to get all speeds back.

User Avatar

99% of the time, the blower motor relay, or resistor block,will be bad if the fan motor only works on high speed.

User Avatar

Probably your blower motor speed resister is burned out.


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.