Why does the fuses for the power door locks on a Ford Windstar keep blowing?
verify the cables that are NOT tocuhing the metal door. Sometimes the cables are old and they crack, just put black tape (electric tape) and that should fix the problem.
The fuse for the power door locks is labeled courtesy or "crtsy". The only way that the power door locks would stop working altogether (no switch will trigger any door lock) is by blowing a fuse or possibly cutting a main wire to the door lock system. If somebody has worked on your electrical system or if you have had a car stereo or alarm system installed this would be a lickely scenario.
My power door locks died on a 92 Buick PA. What can be the problem if all the fuses are in good condition?
The 2005 Dodge Caravans have software problem in the BCM that causes the power locks to quit working. The only fix is to bring the van to a dealer for a software flash update. I disconnected the battery cable and pulled the BCM fuse and the system reset and the door locks are working fine again. I also got my power door locks working. I pulled and reinstalled (but did not replace) all fuses and…
I'm not a mechanic / technician but I was looking at the Owner Guide and there is a common fuse in the Power Distribution Box in the engine compartment ( the PD BOX is " live " ) In the 2nd row of fuses from the drivers side and in the 3rd space from the firewall end of the PD BOX is a 30 amp maxi fuse for the power windows , power locks and…
I replaced a battery in a 98 Camry It turns but still wont start also the power locks windows and radio don't work?
This is not an answer but I have a 2000 focus ZX3. The power door locks quit working and the trunk will not unlock. I purchased a haynes manual to locate fuses. Found no problem. The manual alludes to the striker plate has a electrical connection. I can get to the trunk from inside but can not unlock it HELP !