Top Answer
User Avatar
Wiki User
Answered 2007-09-20 23:03:55

In all probability the fuse has blown for one reason or another - start by replacing the fuse (panel located under dash or in kick panel drivers side) if the replacement blows as well then you have a dead short to find (a wire bared and touching metal) good luck


Your Answer

Related Questions

How do your remove the dashboard on a 2000 Ford Ranger?

Try checking the fuses. try checking the plug on the harnes at the back of pickup on frame.

4x4 dash lights not working 94 ranger

Do not get involved take it to a garage they are a piece.

You have to access the gauges by removing the cover. Unless you know what you are doing, you can mess up a lot of things working on the dash.

The 1997 Ford Ranger ECM computer is located behind the dashboard. The computer will be on the passenger side of the passenger compartment.

right side under the dashboard. hard as everything to get to. easier to take it somewhere

On the bottom side of the dashboard, in close proximity to the steering column,

The working conditions of a game ranger are different each day. Some days it will be sunny and everything will be OK. Other days there could be a flash flood.

DIMMER SWITCH OR WHAT?"How_do_you_remove_instrument_cluster_on_98_Ford_Ranger_to_replace_cluster_bulb"My 1995 Ford Ranger dashboard is dark, the control to the cab light is operational. I have installed a JVC Stereo with is the only light I have on the dashboard. Do I need to remove the steering wheel to get to the components of concern?

Go to auto-zone and buy the repair book and in the back is what you need.

because it is a kind of a range !

Yes your owners manual should tell you where it is. If you dont have a manual, call a local garage or dealership. I had a ranger at one point and the switch may be under the dashboard.

The fuel pump relay on a 1987 Ford Ranger is located under the dashboard near the steering column. It is typically mounted right near the firewall.

i think it is located in the passenger footwell below the dashboard behind a plastic cowling

The 1994 Ford Ranger pickup truck turn signal switch can be found below the dashboard. The switch will be on the drivers side. The turn signal switch should be labeled as such.

i am pretty sure the Pokemon is chinchou but i am still working on my ranger so i don't know how to get it

i have a 99 ford ranger xlt. my code scanner connector is not working,is there a fuse for it

They stopped making them in 2011 due to decreasing sales. See the related link.

He began working on his grandfather's cattle run.

I am not certain if this applies to every year. . . but yes. Recently (past 2-3 years) Ford has offered a standard XL Ranger with a "Sport" appearance package. This included front fascia and "sport" tail lights....which were only Mazda B-Series extras.

The 1994 Ford Ranger pickup truck map sensor is located behind the dashboard, on the passenger side of the passenger compartment. The map sensor is contained in a dust free box.

uhh they should be working now (its November 21 2010) that or its your connection

Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.