0
There is no fluid in the system or master cylinder/slave cylinder failure (hydraulic). Cable streched or broken (if not hydraulic).
Wiki User
∙ 16y ago
Add your answer:
Earn +20 pts
How do you bleed a clutch on a 1993 Honda Civic?
Pump the pedal to the floor and then screw on the cylinder.
Where is clutch slave cylinder on 1985 Honda Prelude to fill?
hi, you may find that it dose not have a clutch cylinder, as this model usually has a cable. confirm this by following thru from top of clutch pedal. regards razzel
How do you adjust a hydraulic clutch on a 1990 Honda Prelude?
You can bleed it though if the pedal is just low. Check the master and slave cylinders for leaks too.
2005 Sunfire clutch is stuck to the floor?
Well, we need lots more information here. Is the clutch pedal actually "stuck" to the floor? In other words, can you NOT lift the pedal up to the normal position? OR, has the clutch pedal "fallen" to the floor due to no resistance from the clutch?
How do you replace a clutch pedal in a 87 Honda Accord?
any information on 87 Honda accord with the clutch/
Why does your clutch pedal touch the floor?
It's called: Your clutch is working.
Clutch is sticking to the floor of your 1998 Honda civic only sometimes?
The clutch sticks to the floor sometimes if the pedal does not return to pressure plate, which has metal fingers arranged concentrically. YouÊneed to check the master clutch cylinder container to see if the fluid has all leaked out.
Where is the 1995 accord clutch pedal switch?
A 1995 Honda Accord clutch pedal switch is located directly under the clutch pedal. This switch stops the car from starting with depressing the clutch. This helps avoid accidents.
Why does my clutch pedal go straight to the floor and stays down with no pressure?
You have a broken clutch.
How do you install the clutch assist spring on the pedal for a 1993 Honda Accord?
How do you install a cluch pedal spring on a 93 honda accord
What if your clutch pedal isn't working until you pushe it more than halfway in and its hard to downshift 1989 Honda prelude 2.0?
answerchange master cylinder and slave properly then bleed the system properly.
Rover mg zt clutch pedal gone to the floor?
The clutch cable has proabably broken.
