answersLogoWhite

0


Best Answer

have you tried chageing the ignition ampifier ?

User Avatar

Wiki User

15y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: Why is there no spark on Pug205 1.6gti G reg but have changed rotor arm and coil?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Changed the spark wires spark plugs and distributor cap now car will crank but not start?

Check/replace Rotor Check for spark at plugs


Changed rotor cap plugs wires coil on 1990 caprice still no spark what could be the problem?

try the moduel


What could be wrong if i already changed dist cap rotor coil and my 1992 acclaim cranks but has no spark and wont't turn over?

broken timing belt, check it- you wont get a spark if its broken


91 Dakota engine turns but will not start I changed the spark plugs ignition coil distributor cap and the fuel filter. And it still will not start.?

Check to see if it getting spark/fuel Check rotor


Your 1990 Mazda 626 dx died while you were driving it won't start has no spark you changed the cap but not the rotor what next?

Replace the ignition coil.


99 silverado V6 4300 Vortec won't start it has spark I've changed the distributor cap and rotor spark plugs and wires PCV valve and battery now what?

try changing your fuel filter.


Why does my car wind over and I only get spark when I turn the key off I changed the alternator battery coil spark plugs leads and it worked for a couple of days but then the same problem happened?

check the rotor botton in the dizzy


Why does 1991 Mazda 626 runs until it warms up then dies Fuel filter changed cap and rotor changed spark plug leads changed still dies when it gets hot?

A plugged or partially plugged EGR valve could cause that.


On your 89 camaro you have changed the plugs cap and rotor and it still not tunning over What else could it be?

Are you getting spark?Could be Ignition module, pick-up coil, coil...


When do belts on car have to be changed?

View your owner's manual for specifics on the mileage requirements for maintenance. My rule of thumb is to change the belts when you change your spark plug wires and your cap and rotor.


If the check engine light came on in my 1993 Oldsmobile Bravada then the car stalled out and has no spark changed the rotor tip distributor cap and coil but still has no spark?

make certain your rotor is turning as you try starting it.If you remove the distributor cap and watch your while someone turns the engine over your rotor should turn, if not, you might have a sheard pin on the distributor gear or a broken timing chain or belt.


Why do Misfire codes keep coming back you changed spark plugs and wires distributor and rotor?

I would help to know what year and model vehicle you have but, you may have a bad fuel injector.