0
Why is your 1995 Previa firing on 1 of 4 spark plugs the plugs rotor distributor and plug wires are all new?
Wiki User
∙ 14y ago
battery??? and the conections, if your getting this from a diagnostic, it might be your timeing...
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
What does distributor cap and rotor do?
Distributes the spark energy from the coil to the spark plugs in the correct firing order.
Why won't 86 escort start plugs aren't firing?
Could be a bad ignition coil Could be a bad distributor cap or rotor
1984 300z turbo it cranks but wont start is has fuel pressure please help?
Need to see if the plugs are firing, check the coil, distributor cap and rotor.
1988 rx7 was running then just shut off and now won't restart it's getting fuel but not firing?
I would start checking spark plugs and wires, if they are good I would then check the distributor cap and rotor bug. I would start checking spark plugs and wires, if they are good I would then check the distributor cap and rotor bug.
Would replacing the distributor and rotor on a 97 Altima cause it not to start?
Assuming you mean distributor cap and rotor, yes, if you mixed up the firing order.
How do you replace the distributor cap and rotor on a 1998 Toyota RAV4?
there is no distributor on a 98 rav. therefore no cap or rotor. replace the plugs and wires and the tuneup is done
What is the firing order 1983 mustang2.3liter distributor?
1 - 3 - 4 - 2 The distributor rotor turns CLOCKWISE
1995 Chevy s-10 Blazer Why I have fire from distributor to coil but no fire from new coil to plugs?
The spark travels from the coil to the distributor then from the distributor to the plugs. So if you have spark going into the distributor but not coming out to the plugs, I would blame the distributor cap and rotor being at fault.
What is the rotation for the firing order for a 1994 mustang 302?
The distributor rotor turns COUNTERCLOCKWISE
When turning sharply to left the car cut off?
Check the connections from the spark plugs, distributor cap, and alternator. Any one of these things being loose can cause such an issue. If necessary, change the distributor wires (one at a time... don't need to forget the firing order), distributor cap, and rotor, and re-gap your plugs, or replace them outright.
Why won't my 1967 Mustang start after replacing distributor cap and rotor?
no spark to plugs
What is the distributor firing order on a 1975 ford mustang 2.3L?
1 - 3 - 4 - 2 The distributor rotor turns CLOCKWISE
