You may have some fuel pressure but not enough. Do a pressure test with a fuel pressure test gauge, it should have 41 to 47 psi to properly run the engine.
Sorry, But that engine should have 9 to 13 LBS. of fuel pressure. No lower are higher are you will have problems.
Release pressure on automatic belt tensioner
have the transmission rebuilt Itll cost about $1600
I the Blazer will run then the timing can be checked with a timing light. If not, the there are timing marks on the timing gears that will have to be checked to see if the timing jumped.
The transmission fluid on a Chevy Blazer can be checked by idling the engine and allowing it to reach operating temperature. The dip stick can then be removed and checked based on the markings provided.
how do u replace fule pressure regulator in 94 blazer vortec
Have catalytic converter checked.
Have you checked the fuses for the wipers? It may be that simple.
The oil pressure switch on a 1997 Chevy Blazer is located on the bottom of the engine, near the oil filter. It monitors the output and pressure of the oil pump.
Remember that the number one problem with these vehicles is the fuel pump. Have you checked for fuel pressure?
your question should be , whats the proper pressure for the tiers on my 91 s-10 blazer this information is embossed on your tiers
The oil pressure switch on a 1998 Chevy Blazer is on the side of the engine block. It is located above the oil filter.
your losing oil pressure because the pick up is not getting oil due to a build up of sludge in your oil pan, it is a very common problem with those vehicles.