No, not on 1 AA battery which only outputs 1.5 volts. Connect 8 AA batteries together in Series and you will have 12 volts.
Sure you can. But consider what could happen if you did. If precision of time or speed was built into this 6-volt system, a 12-volt battery will make it work faster until something shorts or burns out. If you need more lasting power for the 6 volt system, you should consider putting two 6-volt batteries in parallel to power your 6-volt system.
No, it won't get enough power and won't work.
Wire is wire - is doesn't matter what voltage you use. However, if you are changing the voltage on a device from 240 to 120, given the same power requirement, you may need bigger wires for the doubled current (and increased heat of resistivity).
Yes. The cord only transmits the power. Whatever that goes in is what comes out.
No, that type of equipment has to be designed to work with a standard 1.5 v battery, which has a voltage about 0.9 to 1.6.
No, even if it can fit, the tool will not have sufficent power.
No it will not work
A 12 volt battery charger is designed to charge 12 volt batteries.The answer to the Related Question explains how any battery charger works.
the device may not work
Install a 3 volt battery and forget any modifications. It will not operate on 12 volts.
no
Sure you can. But consider what could happen if you did. If precision of time or speed was built into this 6-volt system, a 12-volt battery will make it work faster until something shorts or burns out. If you need more lasting power for the 6 volt system, you should consider putting two 6-volt batteries in parallel to power your 6-volt system.
www.batteryinternational.com should have a 12 volt battery that will work for you. Hope that helps
well it kinda says in the name TWELVE volt battery so it kinda takes TWELVE volts to work correctly
I found this light http://www.ecolivingcentre.com.au/products-page/?product_id=23 and it is the perfect size and power for a torch we are making in graphics, the only problem is that it runs on 240 volt ac current and the torch im going to make is going to have a 12 volt dc lead acid battery, is there any way that you can make the battery work with this light
The Ever Ready company issued a "PP" series of batteries (standing for 'power pack'), and the PP3 was the small nine-volt battery in that series.
volt or voltage.