I would imagine if the fenders,hood are interchangable the 70 bezels and grill could fit. I'm curious why you would want to use 70 bezels instead of the 73? The 70 are very expensive and hard to find ( I've been looking for a pair myself) 1970 headlight bezels won't work if you are still going to use the 72-74 grill. If you replace the whole grill assembly, any year will fit, wiht the proper bracketry. 1970 bezels are being reproduced now, but grills aren't, and they are considerably more expensive than 72-74.
its called a bezel or a headlight door
can u describe what is the car instrument bezel ,and how its maufactured?
Open the hood and look behind the head lights at the top. Find the three 3/8" nuts that hold the headlight trim bezel on. Remove them and the bezel can be removed so you can get to the stainless trim pieces that hold the headlights in place. There are four screws on the stainless trim pieces that will need to be removed to get the headlight out. Then just unplug the wiring and put in the new headlight. Reverse the procedure to put the trim bezel back on.The two adjustment screws to aim the headlights are at the top and left or right of the headlight buckets depending on the inner or outer headlight. Each headlight has its' own adjustment screws. These are not accessible unless the chrome trim bezel is removed as above.
No headlight relay listed. The headlight circuit breaker is integral with the headlight switch.
I do believe it's a 1970 SS Chevy Camaro. It was a 1970 Chevrolet Camaro SS in the Manga, but NOT in the Anime series. I'm not sure why, maybe they didn't get the rights to it or something. In the anime, I'm not entirely sure if the car is real. Although to the best of my knowledge, it looks to be a 1973 Dodge Dart. Manga = 1970 Chevy Camaro SS Anime = 1973 Dodge Dart?
The Lady in the Car with Glasses and a Gun - 1970 was released on: France: 22 October 1970 Italy: 6 November 1970 Denmark: 27 November 1970 USA: 25 December 1970 (New York City, New York) Finland: 19 February 1971 Japan: 9 October 1971 Hungary: 15 March 1973
Three screws hold the headlight turn signal bezel onto the car. Remove those three screws and the turnsignal will pull out of the fender far enough to twist out the bulb socket.
To change the gauges on a VTI the dashboard gauge bezel needs to be removed from the car. Once the bezel is off the gauges will be easily accessible. Replace the gauges.
· headlight
Fix it.
Some car washes have brushes or flaps that can hit at headlight level and overpower the little wipers.
The Car Coach - 2011 Headlight Cleaning was released on: USA: 28 April 2011