Not recommended.
You need a special tool, a harmonic balancer puller. Go to Autozone and they will usually lend you one for free. VBD
.043
.43L. 1000ml=1L
4L60/E l
Yes it will bolt right up to it.
43L of 18-k gold
Don't know what year you have but some sensors are temperature sensitive and you should run a 195 degree thermostat.
There is one before and one after the catalytic converter.
The fuel lines around the filter; you will need an adapter.
There is no adjustment required, but you can clean it with a carb cleaner.
Use an exhaust made for an LT1 engine the blocks are identical it is the insides that is different. Will bolt right on.
It should be on the front of the intake manifold directly above and behind the water pump.