0
You changed the knock cam and crank angle sensors of your 1996 Nissan Maxima but still the car stalls on you so what do you need to do now?
Wiki User
∙ 13y ago
sounds like you need to check your idle air controller or mass air flow meter, need to check you a/f alpha and make sure its around 100 . check your your fuel presure and see if you have pressure during cranking.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
Why does 95 Nissan maxima stalls every time you stop?
check your vacuum hoses, they could be loose or they could have a leak
Your 91 sable runs bad when cold and stalls after warming up if you let it sit and idleI have changed the O2 sensors and the check engine light comes on intermittently.HELP?
take it to a mechanic
Your 1991 Nissan Pickup squeals and stalls at idle?
belt is loose.
Sentra stalls making turns?
If a Nissan Sentra stalls when making turns, check the fuel and spark. The coil may be cutting out when it gets hot.
1991 Nissan Truck squeals and stalls at idle?
check your alternator belt,and your pulleys ,
Nissan Maxima 1995 with 108000 miles engine stalles when the cars is stopped it starts ok and then stalls again no enginne service light Any suggestion please?
check your fuel filter Might want to clean your throttle body. check you Mass Airflow Meter (MAF sensor).
1997 Nissan altima stalls after 15 minutes?
Your intake manifold gasket needs to be replaced.
If 2002 Nissan Altima stalls when put into gear what is wrong?
it sounds like the neutral switch
When you try to start a 98 maxima and it stalls out and won't start and the lights go dim?
I'm no expert, but it could be a battery or alternator related problem.
Why all the black smoke from your 1995 grand marquis Changed oxy sensors maf sensor cleaned out air passages on top back of engine. Car stalls while driving and shudders when coming to a stop.?
It sounds like it is your coolant temp sensor.
Why does a Nissan Altima 2005 suddenly stalls then turns back on?
Have the Ecm re-programmed for free at dealership
97 Nissan maxima sometimes it runs good and at other times it runs sluggish at normal speed and stalls when stopping or slowing down to make a turn check engine lights is on codes are PO325 and PO443?
po 325 is a knock sensor and code po443 is evap canister purge control valve
