0
Your 1996 Lumina 3.1 eats up its coil packs 3 over the past year always resulting in a check engine light and a code P301 Mult cylinder misfire After checking and replacing a defective coil the probl?
Wiki User
∙ 18y ago
Code 301 is cylinder # 1 misfire. You don't need to keep replacing coil packs until you find out why they are going bad. Now if you are buying these coils at a parts store that sells inferior foreign made parts, "can't say the name", then this may very well be the problem. If you know this is not the case, then take this to a technician that can see why they are going bad. The coils are going bad for a reason. Find that reason and problem solved.
Wiki User
∙ 18y ago
Add your answer:
Earn +20 pts
What causes lock cylinder to stay in start position?
It is defective and needs replacing.
What is check engine code P0301 on 1999 New Beetle?
PO301 means you have a cylinder misfire in the # 1 cylinder. Can be defective spark plug or plug wire. Can also be a defective fuel injector on that cylinder.
Why Brakes still go to floor after bleeding 2004 and replacing master cylinder?
There is still no fluid pressure. Make sure that the master cylinder was bled as well as the wheel cylinders. New master cylinders can be tough to bleed all of the air out. The new master could be defective.
What would the symptoms be for a compressor that has two cylinders and only one is pumping?
How do you fix no compression in one cylinder? Yes, a dead cylinder can be fixed by checking and rectifying any defective component that falls among some of the reasons that result in a dead cylinder; in order to fix a dead cylinder, you will have to diagnose the cylinder by using a compression gauge to test whether there are any cylinders with no compression. Usually, a leaking gasket.
Do you have to get alignment after replacing wheel cylinder?
No.
Why your 1997 Honda accord lx 4-cylinder radiator fan wont run?
Check the fuse and the connections first. If the fuse and connections are good, then turn on the A/C. If the fan does not run, then apply 12 volts directly to the fan. If it still does not run it is defective. If it runs then the thermal relay is defective and needs replacing.
How would you check the level of fluid for the slave cylinder ford ranger?
you cannot check fluid level in a slave cylander. if cylander is not working properly. you either have air in it and need to bleed it,or cylander is defective and needs replacing
Why do the brake lights on a 2001 Dodge Intrepid stay on when you release the brake pedal whether or not the car is on or while your driving?
Defective or out of adjustment brake light switch, if the switch is mounted on the brake lever. If the switch is on the master cylinder, then it needs replacing.
Instructions for replacing air filter on 1989 4 cylinder Buick Skylark?
instructions for replacing air filter on 1989 Buick Skylark 4 cylinder
No brake pressure on a 1986 VW Cabriolet?
Master cylinder empty (no brake fluid) Leak in brake line or wheel cylinder Defective master cylinder
Do you need to replace the ignition lock cylinder when you replace the ignition switch on a Pontiac Sunfire 1999?
No, not if it is not defective. If the ignition switch is defective then that is all you need to replace.
How do you repair the PO300 code on a 97 Chevy C1500?
P0300 is caused by a detection of random cylinder misfires. Start by checking/replacing the distributor cap, considering ignition tend to be the most likely and easily resolved problem causing this.
