The simple answer is; you can't, it's meant to do that. The red, flashing, LED shows that the alarm system, is set and functional.
It is the L.E.D light for the factory alarm.
When the LED light on an aftermarket alarm stays on, it means that the alarm is active. The light generally shows that the alarm status is "ready."
De Soto led an expedition as an explorer and then went to Mexico.
You are able to purchase flashing LED lights via California based company Flashing Blinky Lights. The company has its own website which allows users to view and purchase from a huge collection of LED based lighting accessories. Items range from fashionable goods, technology, to housewares.
Flashing led lights can be purchased online by going to Amazon, Ebay, Hyperlights, Coolglow and Lumastrobe. Different colors, sizes and watts/power are some of the choices that you can make.
One can buy a flashing LED from various stores both online and in stores. These places include: Ebay, Amazon, Radio Shack, Maplin, Lightbar Warehouse, and Amperor Direct.
in a flashing led circuit connected in series
Nothing on 99 but 96 Contour has a red LED that blinks (a tiny light) on the driver-side dash vent next to door. This LED blinks on-off continuously when armed.
This can vary based on the type of alarm and manufacturer. Refer to the user manual for your alarm system to troubleshoot any possible problems with your alarm.
A visual notification that the alarm is in valet mode is the LED light is on solid. If the LED is on solid and you wish to make the alarm active again, turn the ignition "on" then, press and hold the valet/programming switch for two seconds. The LED light will turn off.If the LED light is not on solid then, the issue may be with siren itself.
the led panel is burnt out you can either take it to a radio repair shop or buy a used radio you can't fix it