0
Assuming that you mean "wiper blade" (blade and frame) which are replaced often rather than "wiper arm" (piece from the spindle at the hood to the wiper blade) which are rarely ever replaced, the 1988 Chevrolet S10 Pickup takes 16" wiper blades on both sides front. See sources and related links below for more information. Since there are over 22 different wiper arm attachments, do not buy wipers just by length only - be sure to lookup exact wiper blade part numbers by vehicle make, model and year for the brand wiper you decide to purchase. This ensures correct length AND correct attachment.
What else can I help you with?
How do you remove the windshield wiper motor on a 1988 Pontiac Firebird?
To remove the windshield wiper motor from a 1988 Pontiac Firebird, first disconnect the negative battery cable to ensure safety. Then, remove the wiper arms by taking off the nuts securing them and carefully prying them off the motor spline. Next, access the motor by removing the interior panel under the windshield, and disconnect the electrical connector. Finally, unbolt the wiper motor from its mounting bracket and carefully pull it out.
How do you remove the windshield wiper motor on a 1988 Firebird?
To remove the windshield wiper motor on a 1988 Firebird, start by disconnecting the negative battery cable to ensure safety. Next, remove the wiper arms by unscrewing the retaining nuts and pulling them off the splines. Then, access the motor by removing the interior panel or cowl cover, followed by disconnecting the electrical connector and unscrewing the motor from its mounting bracket. Finally, carefully pull the motor out of its housing.
Where is the wiper motor on a 1988 jeep wrangler located?
The 1988 Jeep windshield wiper motor is located on the firewall in the engine compartment. The wiper motor will be in the center of the firewall.
How do you fix windshield wiper motor on a 1988 crx Honda?
To fix the windshield wiper motor on a 1988 Honda CRX, first ensure the problem is indeed the motor by checking the fuse and wiper switch. If those are functional, remove the wiper arms and the cowl panel to access the motor. Disconnect the wiring harness and remove the mounting bolts to take out the faulty motor. Replace it with a new or refurbished motor, reassemble the components, and test the wipers to ensure proper operation.
Will a 1988 pickup windshield fit a 1999 windshield?
That depends on the make, but not likely with that many years in between.
How do you remove the ignition switch in a 1988 Isuzu pickup?
how to remove lock cyliner switch 1988 Isuzu pickup
How do you replace windshield wiper motor on a 1988 Mercedes 560SL?
under sterring column remove the 2 covers you will see 3 nuts and linkage remove and pull motor out from engine bay
Does the 1988 Nissan Pulsar se have two separate front windshield wiper motors?
No
How do you change the wiper blades on a 1988 Chevrolet celebrity?
To change the wiper blades on a 1988 Chevrolet Celebrity, first lift the wiper arm away from the windshield. Press the release tab on the old wiper blade, then slide it off the arm. Align the new wiper blade with the arm, ensuring it locks into place, and gently lower the wiper arm back onto the windshield. Repeat the process for the other wiper blade if needed.
Where is the windshield wiper fuse on an 88 ls Oldsmobile?
The windshield wiper fuse on a 1988 Oldsmobile Cutlass Supreme LS is typically located in the under-dash fuse box. To access it, you'll need to remove the cover of the fuse panel, which is usually situated on the driver's side, near the steering column. Look for a fuse labeled "Wiper" or "Windshield Wipers" and check if it's blown. If so, replace it with a fuse of the same amperage.
What is wrong if the windshield wiper motor on a 1988 s10 sometimes makes noises but the wipers never work?
Broken or disconnected wiper transmission (linkage)?
Where is the windshield wiper pump located on a 1988 Chevy Nova?
look on the bottom of the washer fill tank.
